USB Power Port installation

In this day an age it is pretty important to have power ports to be able to charge your phone, music player, etc.   So as an upgrade I installed this Dual usb power port.

I got it from amazon and thought it would fit next to the ash tray, but it was too small for that cut out in the plastic.  So I then decided to put it in the location next to the emergency brake handle.   Where the aux port is for the factory radio.  Since I replace the factory radio already, I didn't need the aux port their.

I started by connecting the pigtail that comes with the usb port to the connection behind the cigarette lighter.

I then ran the wires under the carped, and inside the plastic housing for the gear shifter.  

I ran the port into he whole in the plastic cover next to the brake handle. 

I installed it into place like so.   That is about it.  Pretty straight forward.

Parts used in this installation Dual usb power port.




Did you find this helpful?  Leave a comment and let me know any questions you may have.

Thanks for reading.

Hidden 12 power outlet install

I have a Garmin Nuvi GPS unit inside my vehicle.  I use it frequently in personal and business life.  I enter in addresses and location of bartending events.  I use it to check traffic along the way to places both personal and business related.   One of the things that bothers me is having the power plugged into the cigaret lighter port.   It sticks out and occasionally gets in the way of me shifting.  It also looks ugly.  One of the things I wanted to do in  my previous vehicle was to wire in a power port behind the dash somewhere so it was not visible and would power on with the car.  

So I purchased a cigarette light socket port with a pigtail lead from Amazon.com

I started by removing the lower panel containing the cig lighter and ash tray.   They all just pull out so its not too difficult.  Now i had access to the connectors.   Note, the positive connector is the smaller one.   Ground is the larger one. 

I installed these connector adapter splitters.  They let you add a circuit while keeping the original circuit.   They are great.  Just be sure that nothing else can touch the positive terminal.   I would put electrical tape or something similar around any exposed metal of the positive terminal so it doesn't short out.  I used crimp on female spade terminals to connect the power socket wires.

Notice that the top connector has been ground down a little to be small enough for the factory positive connector to fit. 

Cig light wires connected with female terminals.

Factory connector in place with the second circuit in place.  

I ran the wire down from the factory light to the panel just below. 

I set the whole assembly in between these ducts behind the lower  panel.  It is held snug.

All buttoned up and lower cover re-installed. 

Ran the wire under the dash, past the steering column and up through the speaker grill.

Fits just right in the lower corner. 

Tools used in this post- pick, connector crimper, sand paper (to grind down the positive terminal)

Parts used in this post
Female spade connectors,  connector adapter,  cig lighter socket,.



What else can I share. Tell me your thought or comments or requests.  I'd love to hear them.

Thanks.
Vince.